EM-15eII & EM-30eII
Electrostatic precipitator oil mist collectors




Electrical


Mist


Max. airflow


Premium efficiency motor
The EM Series of electrostatic precipitator mist collector is the most innovative and technologically advanced series of mist collector. This electrostatic method is over 99% efficient in trapping electrically charged mist particles. By utilizing tungsten electrode technology, the EM series showcases superb durability. This, along with the elimination of filters and the clogging associated with them, not only provides a reduction in maintenance and operational costs but keeps this design environmentally friendly as well.
Features:

A powerful collection of highly concentrated mist up to 200mg/m3. The bestseller among electrostatic precipitator mist collectors. Operational for both oil and water-soluble mist.

  1. The electrostatically trapping method keeps filter costs at zero
  2. Zero Filter waste and No Filter To Clog
  3. High efficiency greater than 99%
  4. Small-capacity models
  5. For oil/water soluble mist collection
Electrical filter
High concentration mist
Oil and water-soluble mist
Breakthrough electrostatically trapping method

Air-containing mist particles pass through the charging section having the corona effect, and those mist particles become positively charged. When this charged mist flows into the final stages of the mist collector, it is electrostatically attracted to the mist collector plate (ground electrode) where it is trapped and collected.



No Clogged Filter

Unlike the old filter method, there is absolutely no drop in air flow due to clogging so air flow is always stable during operation.




Differences between oil mist and water-soluble mist

Mist characteristic is dependent on type of cutting fluid (coolant/lubricant) being use. It is whether water-based or purely oil-based. Oil mist is mainly caused by the vaporization of cutting fluid due to heat during the metalworking processes such as machining and stamping. On the otherhand, water-soluble mist is mainly caused by the cutting fluid scattering due to physical shearing during metalworking processes. Therefore, particle size of water-soluble mist is bigger (2~10μm or larger) compare to oil mist (2μm or smaller). The particle size difference between water-soluble mist and oil mist is more than 10 times. This is also the same in term of concentration. If you are using oil-based cutting fluid, EM series is the best choice.



Internal Structure



External View (Unit: mm)



Application

Specification

Particular Unit EM-15eII EM-30eII
Power Supply   3-Phase 200V 50/60Hz
Output kW/HP 0.75 / 1 1.5 / 2
Air Flow m³/min 15 30
Static Pressure 50Hz Pa 350 280
60Hz 600 500
Suction Port Ø mm Option: 125, 150, 200 Option: 150, 200, 250
Dimensions (WxDxH) mm 478 x 993 x 620 813 x 1093 x 620
Weight kg 72 120
Amano © 2025, All Rights Reserved