SI Series



Woven Plate filter


Pulse jet


General dry dust


Max Filter area
Easily and safely replace filters from the side instead of from the top of dust collector. Compared to molded filters, the woven filters of SI series are softer and have a larger amount of temporal deformation during pulse jetting, so they have excellent dust-shedding effects and can demonstrate stable dust collection performance. Adopt down-flow system to prevent dust collected inside dust bucket from re-adhering to the filter surface.


Down-flow & Side-inlet Dust Collector

  1. Suitable for collection of sticky powder
  2. Powder recovery including air venting unit for silos
  3. Powder with low bulk density that requires down-flow
  4. Have a wide range of filter materials to choose from, therefore you can choose suitable one best fit for your application.
Tetoron felt woven filter
Standard material: Polyester
Surface treatment: Singed
Corresponding models: SI
Application: General dry dust with particles size of about 10μm
Heat resistant temperature: 80 °C ( 176 °F)
Filtration performance: Good

Various filters are available
Down-flow
Down-flow prevents collected dust inside bucket from adhering back onto filter surface. Best for low bulk density powder applications.
Easy filter replacement

Filters can be installed or removed safely and hygienically from the side at outside dust collector.
Dimensions

Specification

Model Dimension (unit: mm) Filter Area Filter length No. of valves Compressed
air consumption
Weight
W D H mm L/min kg
SI-0502 600 1450 2400 10 1083 5 60 680
SI-1002 1100 1450 2400 20 1083 10 125 950
SI-1004 1100 1450 3500 40 1083 8 100 1300
SI-2003 2200 1500 2950 60 1083 12 150 2050
SI-2004 2200 1500 3500 80 1083 16 200 2500
SI-2005 2200 1500 4050 100 1083 20 250 3000
Amano © 2025, All Rights Reserved